APC Smart-UPS X 3000 Rack/Tower LCD - UPS - 2700 Watt - 3000 VA - With APC UPS Network Management Card AP9631 - SMX3000LVNC

• Intuitive LCD interface
  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
• High frequency design
  Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
• Auto recognition of external batteries
  UPS recognizes when external battery packs are attached and automatically adjusts runtime.
• Predictive replace battery date
  Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Outlet group control
  Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
• Load shedding
  Turn off select outlet groups in a pre-determined sequence to shed less critical equipment and conserve runtime (UPSs with switched outlet groups).
• Pure sine wave output on battery
  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Multiple switched outlet groups
  Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
• Wide input voltage range
  Designed for harsh electrical environments to save battery life.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
• Overload protection
  Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Adjustable voltage-transfer points
  Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
• Adjustable voltage sensitivity
  Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions.
• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Rack/tower convertible
  Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Network manageable
  Provides remote power management of the UPS over the network.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Predictive failure notification
  Provides early-warning fault analysis ensuring proactive component replacement.
• Sequenced network shutdown and reboot
  Customize network shutdown and reboot sequence of connected servers and UPSs.

APC award-winning Smart-UPS is the most popular UPS in the world for servers, storage and network power protection. Trusted to protect critical data and equipment from power problems by supplying clean and reliable network-grade power. In addition to legendary reliability and manageability, Smart-UPS have extremely high efficiency at low, medium and high load levels making them ideal for today's multi-core or virtualized servers that have varying load consumption. Smart-UPS feature a 16-segment LED display, extended range automatic voltage regulation (AVR), and pure sine wave output on battery.